Counterfort retaining wall

/Tag:Counterfort retaining wall

Counterfort Retaining Wall Design Example Using ASDIP RETAIN

By: Javier Encinas, PE | December 5, 2018 ASDIP RETAIN is a structural engineering software for the design of retaining walls. It includes the design of counterfort retaining walls based on the IBC / ACI 318 provisions. This document is a step-by-step design example of a typical counterfort retaining wall using ASDIP RETAIN.As an example, consider the retaining wall shown below, which supports a flat backfill load. Due to the wall height of 25 feet, the use of counterforts has proven itself to be a more economical solution. The soil bearing capacity is 4 ksf. The backfill density is 115 pcf [...]

By | December 5th, 2018|Categories: Retaining Wall Design|Tags: , |2 Comments

How to Design Counterfort Retaining Walls Using ASDIP RETAIN

By: Javier Encinas, PE | April 3, 2018 ASDIP RETAIN is a structural engineering software for design of retaining walls. It includes the design of counterfort retaining walls based on the latest ACI provisions. Following is a graphical overview of the required design steps, with annotated screenshots of the software. Click To Enlarge Enter the dimensions of the stem, counterforts, footing, and shear key in the Geometry tab. Specify the backfill height and slope angle. ASDIP RETAIN shows a tab for each element. Three ways to show results: At-a-Glance, Condensed, and [...]

Retaining Wall Design: ASDIP RETAIN (Version 4) Release

By: Javier Encinas, PE | March 21, 2018 ASDIP Structural Software announces the release of the new version of ASDIP RETAIN (Version 4) engineering software. Design professionals utilize ASDIP RETAIN software for the design of retaining walls. Following are some of the most important features included in this version 4. What modules are included in ASDIP RETAIN 4? This new version 4 includes the following three modules: Cantilever retaining wall - Stem can be concrete, masonry, or a combination of both. Either supported on soil or supported on piles. Counterfort retaining wall - Concrete stem supported [...]

ASDIP RETAIN 4 Is Coming Soon: A Brief Overview

By: Javier Encinas, PE | March 8, 2018 ASDIP RETAIN is a structural engineering software for design of retaining walls. The new version 4 of this software will be release shortly. This document is a brief overview of some of the most important new features included in ASDIP RETAIN 4. Retaining walls supported on piles Now ASDIP RETAIN 4 includes the design of retaining walls supported on piles. The piles information can be entered seamlessly, such as pile type and spacing, pile capacity, batter angle, etc. And you can switch between piles and no-piles [...]