Retaining Wall Design

/Tag:Retaining Wall Design

Restrained Retaining Walls: A Design Overview

By: Javier Encinas, PE | November 30, 2016 Retaining walls are structures designed to bound soils between two different elevations. A retaining wall is then mainly exposed to lateral pressures from the retained soil plus any other surcharge. Many retaining walls are cantilever-type, but it's also common to find in practice walls that are laterally restrained at the top, such as in the case of basement walls supported laterally by an elevated floor slab. This article discusses the design of either concrete or masonry top restrained retaining walls. Our software ASDIP RETAIN will be used to support our discussion. A [...]

By | November 30th, 2016|Categories: Retaining Wall Design|Tags: |3 Comments

ASDIP Project Manager – The Core of the Software

By: Javier Encinas, PE | March 28, 2016 ASDIP is structural engineering software for member design. When ASDIP opens, a window pops up showing a menu bar and icons at the top, some buttons at the left, a tree at the right, and more buttons below the tree. This is the ASDIP Project Manager, as shown in the picture below. This blog post covers the purpose and capabilities of this part of ASDIP software. What is the purpose of the Project Manager? In ASDIP software all project information, including calculations, settings, preferences, etc, is stored in a [...]

Cantilever Retaining Walls: An Overview of the Design Process (Part 2)

By: Javier Encinas, PE | February 21, 2016 ASDIP RETAIN is structural engineering software for design of retaining walls. Competent design of retaining walls can maximize land use and substantially increase property value. This is a two-part blog post. In part one, Javier reviewed the basics of earth lateral pressure theories and overall stability checking. This second part of the article covers the typical loads in a retaining wall, and the structural design of the different components. What loads act on a retaining wall? Ordinarily, retaining walls are subject to surcharge loads at the top of retained mass. A [...]

By | February 21st, 2016|Categories: Retaining Wall Design, Structural Concrete Design|Tags: |4 Comments

Cantilever Retaining Walls: An Overview of the Design Process (Part 1)

By: Javier Encinas, PE | February 21, 2016 ASDIP RETAIN is structural engineering software for design of retaining walls. Retaining walls are structures designed to bound soils between two different elevations. A retaining wall is mainly exposed to lateral pressures from the retained soil plus any other surcharge. This article discusses the design of either concrete or masonry cantilever retaining walls. A typical retaining wall is composed of four main components: the Stem, the Toe at the front of the wall, the Heel at the backfill side, and the Shear Key. The images below show the geometry of a [...]

By | February 21st, 2016|Categories: Retaining Wall Design, Structural Concrete Design|Tags: |4 Comments

Retaining Wall Design: ASDIP RETAIN (Version 3) Release

By: Javier Encinas, PE | December 22, 2015 ASDIP Structural Software releases regular updates to ASDIP RETAIN (Version 3) structural engineering software. Utilize ASDIP RETAIN software for the design of restrained retaining walls and cantilever retaining walls. Following are some features included in this version 3. Click To Enlarge This structural engineering software offers three levels of design results such as At-a-glance, Condensed, and Detailed. ASDIP RETAIN 3 software finds and reports the controlling load combination in each stage of structural design. Click To Enlarge [...]