Structural Concrete Design

/Tag:Structural Concrete Design

Concrete Continuous Beams: A Structural Design Challenge

By: Javier Encinas, PE | February 14, 2016 ASDIP CONCRETE includes the design of continuous beams. This structural engineering software is based on the latest ACI 318 provisions. This article covers the steps in the structural design of concrete continuous multi-span beams subjected to concentrated and distributed loads. Beams are structural elements that support loads applied transversely to the beam axis, which produce a combination of shear and bending stresses. Concrete beams are usually continuous, this is, they span between multiple supports acting structurally as a single element. This is possible because the rebars are placed continuously through the supports, [...]

By | February 14th, 2016|Categories: Structural Concrete Design|Tags: |6 Comments

ASDIP STEEL: Base Plate and Anchor Rod Design

By: Javier Encinas, PE | January 30, 2016 ASDIP STEEL includes the design of base plates as well as the anchorage system. This blog post covers the principal design steps. This structural engineering software is based on the AISC Design Guides # 1, Blodgett "Design of Welded Structures", and the ACI 318-11 Appendix D. Base plates are structural elements at the bottom of columns to spread the concentrated load over a larger supporting area, so that the bearing stresses are under the acceptable limits. Depending on the type of frame the column belongs to, the base plate may be subject to compression, [...]